Not every product can use a standard magnet. Some designs require a curved surface, a specific opening, a non-standard thickness, or dimensions that fit into a limited space. In these cases, choosing a magnet from an existing product range may not be enough.
Jinconn manufactures High Quality Shaped Magnets based on customer drawings, samples, and application requirements. Our work is not limited to a fixed range of shapes. Customers can specify the geometry, dimensions, material grade, coating, and magnetization direction according to their product designs.
We work with both established manufacturers and brands developing new products. Whether the project involves a small quantity for testing or a customized order for regular production, we first look at what the application requires.
Custom Magnet Shapes Based on Your Drawings
The shape of a magnet often depends on where it will be installed and how it needs to work.
For example, a motor may require arc-shaped magnets that follow the rotor structure. An electronic product might need a thin magnet with precise mounting dimensions. In other cases, a customer may need a magnet with holes, grooves, angled surfaces, or an irregular outline.
These requirements cannot always be met with standard disc or block magnets.
At Jinconn, we manufacture different types of custom-shaped NdFeB magnets, including arc, ring, cylindrical, U-shaped, countersunk, rectangular, and other irregular designs. Customers are not restricted to these examples. If you have a different shape in mind, we can review the drawing and assess whether it can be manufactured.
Customization also covers more than the external shape. Depending on the application, we can discuss:
• Length, width, thickness, diameter, and other dimensions
• Corner radii, holes, slots, grooves, and chamfers
• NdFeB magnetic grades and required magnetic properties
• Axial, diametrical, radial, and other feasible magnetization directions
• Nickel, zinc, epoxy, and other suitable surface coatings
• Temperature requirements and environmental conditions
For projects without a finished drawing, our engineers can discuss the initial design and provide assistance in defining the magnet specifications.

No Finished Drawing? Start with Your Product Requirements
Many customers contact us before completing their magnet design. Some have a physical sample but no technical drawing. Others know the installation dimensions but have not yet determined the appropriate magnetic grade.
This is not unusual during product development.
Instead of asking customers to prepare every technical detail in advance, we start with the information they already have. A sample, a 3D model, a basic sketch, or a description of the intended application can help us understand the project.
We then look at several practical questions.
Where will the magnet be installed? How much space is available? Does it need to attract another component or hold a specific position? Will it operate near a motor or another heat source? Does the surface need additional protection against moisture or corrosion?
The answers help determine the material, dimensions, coating, and magnetic specifications.
For NdFeB magnets, selecting the grade is particularly important. A higher grade does not automatically suit every application. Operating temperature, required magnetic performance, and installation conditions all need to be considered.
Jinconn provides free design assistance and free samples for qualifying projects under agreed conditions. This gives customers an opportunity to review the proposed specifications and check the sample before moving into regular production.
Small-Batch Orders Are Part of Our Custom Manufacturing Work
Finding a supplier for a small quantity of non-standard magnets can be difficult. Some manufacturers mainly handle large production runs, leaving smaller projects with fewer options.
However, a small order may represent an important stage of a customer's product development. It could be a prototype for a new electronic device, a replacement component for existing equipment, or a batch required for initial market testing.
Jinconn welcomes inquiries for these types of projects.
We do not apply one fixed MOQ to every shaped magnet. The required quantity depends on the magnet geometry, material, manufacturing process, and production arrangements. After reviewing the specifications, we can discuss a suitable order quantity with the customer.
This also applies to projects involving unusual shapes or additional processing requirements. Rather than asking customers to change their designs to fit a standard product, we first consider whether their original requirements can be accommodated.
For brands that are not ready to place large orders, this provides a more practical way to move from sampling to production.
Dimensional Accuracy and Magnetic Performance
A magnet may look correct but still cause problems during assembly if its dimensions or magnetic specifications do not match the design.
For example, even a small dimensional deviation can affect the fitting of a magnet inside a compact housing. Likewise, an incorrect magnetization direction may prevent the component from working as intended.
These details need attention before production begins.
When reviewing a custom order, Jinconn considers the agreed dimensional tolerances, material grade, magnetization direction, surface condition, and other relevant specifications. The inspection requirements depend on the product and its intended use.
Surface treatment is another consideration. Nickel, zinc, and epoxy coatings offer different levels of protection and may suit different working environments. Therefore, the coating should be selected according to the actual application rather than appearance alone.
Jinconn holds ISO 9001 and ISO 14001 certifications, and also has IATF 16949 certification for automotive-related quality management requirements. These systems support our production and quality management work.
How a Custom Magnet Order Moves Forward
Once we receive an inquiry, the first step is to review the customer's drawings, samples, or technical requirements.
If some specifications are unclear, we discuss them before confirming the design. This may involve checking dimensions, selecting the NdFeB grade, deciding on the coating, or confirming the magnetization direction.
After the specifications are agreed upon, we arrange sample development where necessary. Customers can check the sample and confirm whether it meets their requirements before production continues.
The manufacturing stage follows the approved specifications. Our team handles the relevant processing, magnetization, and quality checks. Once inspection is complete, we prepare the magnets for shipment.
Packaging also matters, particularly for overseas orders. Magnets need suitable protection against impact and surface damage during handling and transportation. We arrange protective packaging according to the product dimensions and shipping requirements.
For suitable projects, Jinconn targets a 30-day turnaround from design confirmation to delivery. The actual lead time depends on the product structure, sampling arrangements, order quantity, and destination.
Customers can also contact our team during the order process if they need updates or have additional questions.

A Magnet Manufacturer with More Than 15 Years of Experience
Jinconn was founded in 2011 and has focused on permanent magnets and custom magnetic assemblies for more than 15 years.
Over this period, our work has covered NdFeB material selection, magnetic circuit design, magnet processing, surface treatment, magnetization, and product inspection.
We supply magnetic components for automotive systems, consumer electronics, industrial automation, renewable energy, and other manufacturing applications. Each sector has its own requirements. For example, an automotive component may need to meet specific temperature and quality requirements, while a compact electronic device may place greater emphasis on dimensions and installation accuracy.
Our engineering and production experience helps us understand these differences when reviewing customer projects.
We also place importance on communication after an order has been placed. Technical questions, specification changes, repeat orders, and product feedback all need timely attention. Our team works with customers to address these matters throughout the cooperation.
Have a Custom Magnet Design in Mind?
A custom magnet does not have to follow the shapes already available in a product catalog.
If you need an arc-shaped magnet, a ring with special dimensions, a small component with mounting holes, or an entirely different geometry, Jinconn can review your requirements and discuss the manufacturing options.
You can send us a technical drawing, 3D file, physical sample, or a description of your product. If the design is still under development, our team can also help with the initial specifications.
Jinconn supplies High Quality Shaped Magnets in customer-defined shapes, sizes, grades, and specifications. We welcome both small-batch inquiries and ongoing production projects.
Contact us with your requirements to discuss your custom magnet order.
